4Runner Front Winch Bumper | Strike | 3rd Gen (96-02)
★★★★★
5/5 Stars. (1 Review)
$1,749.00
Code: V4R3FS
Weight: 97 (lbs)
- CNC cut and formed from .188" steel.
- Tubework option for added grill protection.
- Compatible with most 8-10k non-integrated solenoid or removable selenoid winches (Not compatible with Zeon or Apex)
- Built-in provisions for standard 3"x3" cube lights.
- Built-in provisions for a 20" single-row light bar (22" max mounting width)
- Mounting provisions for 0 body lifts and 1" body lifts.
- Hardware Included.
- Proudly designed and made in the USA.
Victory 4x4 Strike 4Runner Front Winch Bumper | 3rd Gen (96-02)
When you need extra tire clearance, maximum protection, plus recovery options for your 4Runner; our Strike Series front bumper is a perfect choice. This made-in-the-USA bumper features an integrated 20" lightbar mount, 3/4" recovery tabs, plus provisions for many industry-standard winches. Available with optional tubework for extra front-end protection. The bumper is available in a two-stage satin textured black powder coat over durable zinc primer finish.
99-02 models require some trimming of the front frame horns (see video for more info).
Adding a 50W 6 Ohm resistor will solve any hyperflash issue on the provided turn signal/marker lights.
Listed weights are with no tubing; full grill and light protection tubing adds 30 lbs.
Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html
Looking for answers to common questions about us or our products? See our FAQ here.
8 Questions asked on 4Runner Front Winch Bumper | Strike | 3rd Gen (96-02)
•
Ask us anything
Q
robert redgate • 09/09/2022, 9:47:31 PM
can I put a 12,000lb harbor freight winch on your strike 3rd generation bumper ?
A
09/12/2022, 10:27:43 AM
Yes, the control box will need to be relocated.
Q
Jacquez Hardy • 09/19/2022, 9:47:16 PM
Would this fit the second gen 4runner the same since pretty much nothing changed on the front end?
A
09/27/2022, 9:56:30 AM
It will not. There are enough differences between the two.
Q
Daniel • 12/15/2022, 1:23:58 AM
Does it come in a width to account for the limited fenders?
A
12/20/2022, 2:28:33 PM
We only offer it in the width shown in the photos. The limited fender flares would extend beyond the bumper.
Q
Isaiah soberg • 03/04/2023, 4:33:17 PM
Does the light bar come with a switch for the interior?
A
03/13/2023, 11:54:40 AM
A light bar is not included with this bumper.
Q
Ian • 04/12/2023, 1:11:19 PM
What winch do you have installed in the pictures?
A
04/17/2023, 7:24:12 PM
We can't recall. Likely a Warn VR8s.
Q
Victor • 09/18/2023, 1:48:03 AM
Can I do Baja designs squadron for the fogs?
Can you make the turn signals led instead?
A
10/19/2023, 4:11:46 PM
The Baja Designs Squadrons would be a great option for the 3z3 cut outs. The included turn signals are LED.
Q
Ryan • 05/31/2024, 2:18:12 AM
Will this fit on a 1996 toyota hilux surf SSR-X ???
A
01/08/2025, 1:38:23 PM
We haven not verified fitment on the Hilux.
Q
Raymond • 06/05/2024, 6:04:38 AM
Would a x20 gen 10k winch fit with this? Thank you.
A
01/08/2025, 4:16:19 PM
Looks like it should, you may however need to relocate the solenoid.
0
0
0
0
1
Scott O'Grady (CA) | March 10th, 2025
Looked at a lot of after market front bumpers and this was my choice just on looks alone. When it arrived I knew I had made the right choice!
The construction and the welds were all top notch. The finish of the unit as a whole with the flawless powder coat finish just looked great.
The installation with the help of a friend when it came to bolting in on wasn't any problem except both of the plates on the frame were both a bit cock-eyed and had to be trimmed and ground with an angle grinder. This was on my 96' Limited model, not the later models with the big plates, no big.
I just installed a winch, the cube lights and the little turn signals provided before mounting it.
Super happy with this bumper and it looks pretty bad ass now! On a side note...living in California they require a front license plate. I thought about mounting it to the front skid plate and then ending up getting the flip up mounting bracket offered here, which wasn't cheap. Anyhow it looks great and is legal and is ready too rock and roll...thanks Victory 4x4 for another quality product!
scotto-
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions (if available) as well.
Please be sure to read the PDF installation instructions (if available) as well.
