Tundra Front Winch Bumper | Blitz | (14-21)

Victory 4x4 Tundra Front Winch Bumper | Blitz | (14-21)
Our Blitz winch bumper for the Tundra is designed to integrate with your factory front bumper fascia for a clean look with maximum recovery options. This made in the USA bumper features an integrated 20" lightbar mount, 3/4" recovery tabs, plus provisions for many industry standard winches. The bumper is available in a two-stage satin textured black powdercoat over durable zinc primer finish.

CNC cut and formed from .188" steel.
Compatible with most 8-10k non-integrated solenoid or removable solenoid winches.
Built in provisions for a 20" single row light bar (22" max mounting width)
Not compatible with Onx6 20" Light Bar.
Proudly designed and made in the USA.
Requires cutting.
Tubework version compatibility with Toyota Safety Sense equipped vehicles not guaranteed.

The sensor may be located behind, or it's vision prohibited by the tubework based on grille model.

Weighs 80lbs, around 45lbs more than the stock parts removed.

Listed weights are with no tubing; single hoops and prerunner tube work add roughly 10 lbs in steel, 5lbs in aluminum; full grill and light protection tubing adds 30 lbs in steel, 15lbs in aluminum. (Not all tubing options are available on all bumpers.)

Looking for answers to common questions about us or our products? See our FAQ here.

27 Questions asked on Tundra Front Winch Bumper | Blitz | (14-21) • Ask a Question

Ask us anything

Q Justin Pasutto • 04/11/2020, 2:44:47 AM Does this interfere with Pro models safety sense / cruise control? Does it fit with pro front skid plate ?

A 04/17/2020, 5:09:59 PM In our experience, it does not interfere with the safety sense if the radar is in the logo on the grill. However because of limited official testing, we can only guarantee that the non-tube version works with safety sense equipped vehicles. This bumper does mount in the same place as the front of the TRD skid, so there may need to be some modifications for them to work together.

Q hoky • 07/12/2020, 1:54:46 AM might fit the tundra 07/13

A 07/15/2020, 1:48:15 PM It is designed for 14+ model year tundras. We don't know what build date in 2013 these trucks were changed over, but if your Tunrda looks like the one in the photos it will work.

Q Erick Schaefer • 07/23/2020, 10:54:49 AM Will this bumper work with .5" bumper shims?

A 08/05/2020, 11:01:24 AM No it will not.

Q Michael • 07/29/2020, 5:22:42 AM Can you use a highlift jack on this bumper in the holes nest to the winch opening?

A 08/05/2020, 11:01:24 AM Yes.

Q Tom • 08/14/2020, 8:01:16 PM Will a havoc off-road 12,000 lb winch fit in this?

A 08/18/2020, 11:15:37 AM Based on their specs on the website it should fit.

Q MSmith • 09/21/2020, 8:45:15 PM Will this work with the Warn 9.5 CTI winch?

A 09/24/2020, 11:01:43 AM Should fit fine.

Q Nate • 10/30/2020, 10:21:39 AM What winch is installed in your showcase truck in these photos? Also, will a RIGID 30# light bar install with this bumper?

A 11/03/2020, 4:03:33 PM There is a Zeon 10s in these photos. It's designed for a single row 20" bar, so the Rigid SR Series in 20" would work great.

Q Zack • 12/04/2020, 10:26:44 AM Will a badland apex 1200 winch fit?

A 12/04/2020, 12:13:29 PM Yes

Q Steve • 12/17/2020, 8:17:45 PM Can this be modified to fit my 2008 Tundra

A 12/23/2020, 5:37:41 PM Not to our knowledge.

Q Adam • 02/26/2021, 8:24:22 AM How much does the optional tubing weigh?

A 02/26/2021, 10:33:53 AM About 5lbs.

Q Nathan • 03/11/2021, 1:40:17 PM Will this work with a 2016 Toyota Sequoia? Thanks!

A 03/16/2021, 3:46:53 PM Sequoia bumpers are in the works.

Q AJ Espinoza • 03/23/2021, 6:18:06 AM Will a double row led light bar fit? Or do I need a single row?

A 04/02/2021, 1:31:55 PM Single row.

Q Josh Shorley • 04/26/2021, 2:40:42 PM Will the RCI skid plate fit with the blitz Tundra bumper?

A 04/28/2021, 5:26:15 PM Should not be an issue. Looks to mount very similar to our skid.

Q stewart • 05/26/2021, 2:30:35 PM Is there any plan to make a similar bunker for gen 2 tundras?

A 06/04/2021, 10:30:55 AM Nothing in the works at the moment.

Q Teoyt • 12/07/2021, 10:08:30 PM Do you guys do any mods to the bumper. I love the look of the bumper but need a 2” trailer receiver in place of where the winch Farrell is.

A 12/08/2021, 12:22:09 PM We don't do custom modifications. You could order in bare steel and have a local fabricator make changes for you.

Q Andy Fernez • 12/29/2021, 7:31:06 PM Will the factory skid plate still bolt to the bottom of this bumper?

A 01/04/2022, 5:34:47 PM We do not have provisions to bolt the factory skid to our bumper.

Q MADu1231 • 02/28/2022, 5:57:41 PM (1) Will the Warn VR EVO 12-S Winch fit with this bumper? (2) Will this interfere with the 2019 Tundra limited front sensors? (3) Does the satin black powdercoat finish look like stock black parts of the bumper or lighter or darker? THANKS

A 03/04/2022, 2:04:39 PM The EVO will fit, but you will likely need to relocate the solenoid box. The front parking sensors will work fine with this bumper.

Q Mark Shotton • 04/06/2022, 10:54:04 AM I just ordered the Blitz for my 2018 Tundra. I watched your video on winches and it was "implied" that the solenoid of the WARN 103255 VR EVO 12-S would have to be relocated. Is this the case? Would this be a special order from WARN?

A 04/06/2022, 1:20:55 PM Warn does offer a relocation bracket. The new VR's seem to be more compact, but we haven't test fit them in a Tundra.

Q Jason • 05/16/2022, 11:20:06 AM Will the Superwinch SX12SR fit the Blitz Bumper for a 2016 Tundra?

A 05/25/2022, 3:01:57 PM Yes, but you may need to relocate the solenoid box.

Q Christopher • 10/29/2022, 9:07:55 PM How far does this stick out in comparison to the factory bumper?

A 11/03/2022, 12:16:41 PM It sticks out a few inches further than the stock bumper.

Q Anthony Carbon • 11/15/2022, 11:37:43 AM Is the Blitz Winch bumper compatible with 1) stock TRD Pro skid plate and 2) Badlands 12000lb winch? Thank you!

A 11/18/2022, 2:57:05 PM This bumper does mount in the same place as the front of the TRD skid, so there may need to be some modifications for them to work together. The winch will work fine.

Q Reed • 11/20/2022, 10:39:54 PM What skid plate can I get to fit with this bumper? I have the Trd sport. With the same grill as the pictures shown. With the sensors still work with the tubing?

A 12/01/2022, 10:38:33 AM Our skid works great: https://www.victory4x4.com/product/VTU23SD-GN.html The tube work version compatibility with Toyota Safety Sense equipped vehicles not guaranteed, but on the truck pictured we didn't seem to have issues.

Q Colin • 01/05/2023, 9:06:52 PM How do you access the winch clutch for free spool?

A 01/10/2023, 12:51:06 PM You can reach in from the front hole of the bumper.

Q Victor • 10/22/2023, 3:16:56 AM Does the optional tubing interfere with TRD Pro grill Safety Sense Sensors that is located beneath the logo?

A 12/05/2023, 4:51:34 PM We do not guarantee compatibility with the tube option. Although it may not be directly in front of the sensor, we aren't able to test our bumper in every possible scenario that may trigger the sensor. We recommend the non-tubework option if you'd like to retain full use of your TSS.

Q TX TRD • 04/06/2024, 4:40:34 PM Do you have a recommended mod/solution to run the blitz bumper w/ a OEM TRD Pro skid plate?

A 04/15/2024, 5:08:49 PM In order for both to mount together, you'd just need to trim roughly an 1" from the leading edge of the skid plate.

Q Phil • 04/12/2024, 10:34:58 PM Does the OEM Toyota airbag sensor function continue to work with this bumper installed?

A 04/15/2024, 4:38:52 PM Yes

Q rafael • 10/06/2024, 3:25:19 PM could you make the blitz in aluminum, what would be the price and weight?

A 10/08/2024, 10:23:00 AM This bumper is only offered in steel.

Blitz Bumper

★ ★ ★ ★

Peyton | December 7th, 2020

Looks great, stout, and very well built. Doesnt even interfere with the safety sense. My only minor complaint is that it doesnt work with the TRD Pro Skid Plate. So I had to cut some bracing for the winch mount. Which doesnt matter to me Im not going to run a winch anyways.