Tacoma Roof Rack | 2nd & 3rd Gen (05-23)

★★★★★ ★★★★★ 4.91/5 Stars. (32 Reviews)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)
  • Tacoma Roof Rack | 2nd & 3rd Gen (05-23)

Price:
$749.00
Now:
$674.10

 

Code: VT23RK

Weight: 41 (lbs)


Free Shipping!


    This roof rack system allows for mounting almost anything, freeing up valuable bed space for other trip essentials. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.

    • CNC cut and formed from 3/16" aluminum (steel mounting brackets) with extruded aluminum rails
    • Easy bolt together installation
    • No drilling required (Drilling required on Access Cab Only)
    • Works with TRD Desert Air Intake
    • Available with or without 40" lightbar cutout
      • Lightbar cutout version includes light bar mounting brackets
      • Cutout fairing designed for 41.25" max lens housing width single row LED light bar. Up to 43.5" (mounting stud width) bar will fit with our mounts, but trimming of the fairing will be required
    • Milled T-nut access points
    • Sunroof tilt and sliding function works with racks.
    • Powdercoated
    • Hardware Included
      • Black stainless hardware available, see related products
    • Made in the USA
    • Free shipping!

    Rack sits 2.5" above the highest point of the roof (center point).

    We recommend using paint protection film under the front and rear fairings, where they contact the vehicle. This will prevent dirt and debris from scratching the paint over time.

Looking for answers to common questions about us or our products? See our FAQ here.

59 Questions asked on Tacoma Roof Rack | 2nd & 3rd Gen (05-23)

Ask us anything



Q Jason • 03/17/2020, 10:43:41 PM Hey, I was just wondering what the cross bar width is? Thanks...
A 03/25/2020, 3:11:33 PM Right around 47"
Q Shaun • 04/02/2020, 12:47:44 PM What is the depth of the crossbars? Depth meaning orientation from front of vehicle to the back.
A 04/06/2020, 2:43:37 PM The usable dimensions of this rack is about 54" long by 47" wide.
Q Matthew • 04/02/2020, 11:15:34 PM Is it possible to mount lights that face out to the sides of the truck?
A 04/06/2020, 2:43:37 PM Sure, we recommend using surface mount lights as nothing readily fits in the current holes. Many small rock lights come with angle mounting brackets. Those would work well.
Q Campbell Taylor • 04/07/2020, 11:55:29 PM does only a single row light bar fit on this rack?
A 04/17/2020, 5:09:59 PM Yes, it is designed for a single row bar only. You may be able to make a dual row fit, but it would stick above the top of the rack.
Q Cory McDermott • 04/09/2020, 1:52:55 PM Will this light bar fit your rack, without altering it: Superchips LIT E-Series 40 Single Row LED Combo Light Bar - 71041
A 04/17/2020, 5:09:59 PM Based on the dimensions of "41.8" housing width" from the Superchips website, yes.
Q Ethan • 04/09/2020, 8:40:40 PM Does the roof rack come with tent and other accessories
A 04/17/2020, 5:09:59 PM No
Q Gaeton • 05/04/2020, 1:20:14 PM Hello. What is the height of the rack without the 2.5" space at its highest point? Is there a noise reduction option available? Thanks.
A 05/05/2020, 3:07:07 PM The top of the rack is 2.5" above the surface of the roof when installed. The rack comes with rubber weatherstripping for noise reduction.
Q Shaun • 05/04/2020, 2:17:43 PM Does the rubber guard for the bottom of the wind deflector come standard?
A 05/05/2020, 3:07:07 PM Yes it does. But we also suggest using some 3M paint protection film on your paint underneath it, and that is not included.
Q Alexander Clute • 05/07/2020, 4:25:46 PM If hauling kayaks or anything else long, really: Can weight be placed on the light bar attached to this rack without any problems? Additionally, does the TACOMA BED RACK MODULAR BASE line up with this rack so one would be able to use it for hauling something flat? Or would there need to be additional steps taken for that?
A 05/11/2020, 2:36:52 PM That really depends on the strength of the light and if it sticks above the rack rail surface at all. Our full-height bed rack is lower than the roof rack, but adding our universal cargo basket on top of the bed rack will make them similar heights.
Q Spa Duck Specialties Inc. • 05/10/2020, 9:42:53 AM How much does the access cab roof rack weigh & what is the weight capacity?
A 05/11/2020, 2:36:52 PM Around 38lbs. Toyota rates the Tacoma roof with a factory rack at "Max load 100 lbs evenly distributed." Our rack itself can handle significantly more weight than that, and we've had 200lbs dynamic weight on it without issue, static capacity is certainly well above that. All these weight will be at your discretion as they are above Toyota "recommended" capacities. If you need more information please contact us directly at [email protected]
Q Will • 05/23/2020, 5:55:10 PM Does the shark fin antenna need to be removed from a double cab to install this?
A 05/27/2020, 3:57:49 PM No, it clears fine.
Q Matthew • 06/07/2020, 2:44:01 PM Do you sell the front fairing with the light bar cutout separately so one could add that (swap out the front fairing without the cutout) & a light bar in the future when it might be wanted/needed?
A 06/10/2020, 4:43:34 PM Yes, but you will have to call us.
Q nash Mcsweeney • 06/11/2020, 12:38:43 PM what are the dimensions of the side cutouts, I am looking to install side rock lights. Thank you.
A 06/16/2020, 10:12:23 AM They vary, but roughly 4" x 1.25"
Q Andrew Schulz • 06/12/2020, 3:05:47 AM Hey there, I noticed in the photos that there are the Rigid Scene lights Mounted on the side of the rack. I was wondering if the holes are pre-drilled to mount the light or if additional drilling was required? Thank you
A 06/16/2020, 10:12:23 AM Additional drilling is required.
Q Justin • 07/05/2020, 1:24:15 AM What is the static and dynamic load capacity? And how much static load can the roof of a tacoma handle?
A 07/07/2020, 2:39:07 PM Toyota rates the Tacoma roof with a factory rack at "Max load 100 lbs evenly distributed." Our rack itself can handle significantly more weight than that, and we've had 200lbs dynamic weight on it without issue, static capacity is certainly well above that. All these weight will be at your discretion as they are above Toyota "recommended" capacities. If you need more information please contact us directly at [email protected]
Q Tiffany Goodwin • 09/06/2020, 3:32:42 PM I want to use your system on my Taco. I have a 2019 TRD PRO. I have purchased a roof top tent that is a foot longer than the bed. I want to position the extra foot over the cab. I was wondering how much shorter the access cap roof rack is then the four door.
A 09/09/2020, 3:00:07 PM The access cab rack would not work on the double cab.
Q Taylor Curtis • 09/14/2020, 7:22:11 PM Are these rack compatible with sun/moonroofs or can they be modified to be compatible? I have a 2019 tacoma trd off road with a moonroof.
A 09/24/2020, 11:01:43 AM They work fine will all functions of the factory sunroof.
Q Thomas • 09/27/2020, 12:34:02 PM Would it be possible to mount something like a Thule rocket box to the cross bars for carrying skis?
A 10/01/2020, 1:40:01 PM Sure, but you will probably have to bolt it directly to the rack crossbars as opposed to using the Thule clamps.
Q Frank Martinez • 09/29/2020, 1:12:42 AM does this roof rack interfere with satelite radio service,,? because i had a Body Armour sport utility rack before, and it would interfere with satelite service in certain areas.
A 10/01/2020, 1:40:01 PM I can depending on signal strength.
Q Max • 10/02/2020, 9:59:58 PM I have a 2019 TRD Pro with the Desert Air Intake, it looks like the head of the intake is mounted near where the roof rack would mount. Any idea if this roof rack is compatible with the DAI?
A 10/06/2020, 2:10:22 PM The rack is compatible with that intake. In fact some of the product photos show it with the intake installed.
Q Bruce Locklear • 10/26/2020, 4:05:15 PM Do you sell a light for this rack?
A 10/26/2020, 5:00:50 PM Yes, see: https://www.victory4x4.com/product/7040XX.html
Q Cameron Kent • 11/04/2020, 6:05:07 PM What is max outer dimensions for lights bar for access cab roof rack
A 11/10/2020, 5:20:32 PM Same as the double cab. Will be in the product description.
Q Joel • 12/17/2020, 5:02:43 PM How does this system hold up with a RTT?
A 12/23/2020, 5:37:41 PM We haven't tested that at the shop, but we have had customers have good luck with it.
Q christopher • 01/06/2021, 12:15:08 PM What are the useable dimensions of the access cab rack?
A 01/07/2021, 1:16:37 PM 47" x 38" roughly useable on the access cab.
Q Shaun • 01/21/2021, 8:23:29 AM Two questions. First can I obtain the cutout fairing from you after the fact? Second would this https://caliraisedled.com/products/42-slim-single-row-led-bar fit with or without trimming said fairing?
A 01/25/2021, 11:34:30 AM Yes and yes.
Q Adam • 02/16/2021, 6:35:12 PM Would it be possible to mount a Hi-Life jack to the side of the rack instead of the top? What kind of hardware do I need to mount a Hi-Lift jack in either position?
A 02/26/2021, 11:22:33 AM We do not have a side mount for a Hi-Lift but for the top of the rack you can use our Hi-Lift mounting brackets. victory4x4.com/product/VRKHLM.html
Q Michael • 03/17/2021, 8:48:26 PM Will this roof rack support a roof top tent? Specifically the Tuff Stuff Alpha hard top tent.
A 03/22/2021, 6:22:06 PM We've had customers install RTTs on cab racks, and the rack itself can support the weight. You would likely be above Toyota's recommended capacity on the roof however (150lbs) so this would be at your own risk.
Q Jessie • 04/04/2021, 10:52:23 AM Which kayaks racks are best for this rack or should I just tie it down right on the rack itself? Thank you.
A 04/12/2021, 1:13:17 PM We've done universal J mounts as well as just tied them top down on top of foam on the rack. Both work well.
Q ken • 04/11/2021, 8:01:45 PM will this fit with the sharkfin XM satellite antenna on the top rear of the cab?
A 04/12/2021, 1:13:17 PM Yes.
Q Yu Kanazawa • 05/08/2021, 3:02:38 PM Can rear fairing take some weight? I’m thinking I’ll place my canoe alone and will have to rest one end on the rear fairing with cut pool noodle or something to protect the surface, and lift the other end to push canoe up.
A 05/12/2021, 2:02:55 PM It can take some, yes. Pool noodle or other foam protection is a good idea.
Q jacob • 05/25/2021, 6:58:28 PM does the light bar come with the wiring harness
A 06/04/2021, 10:30:55 AM The lightbar option on this rack ONLY includes a light bar compatible fairing and mount, it does not include the light bar or harness.
Q Rim • 06/15/2021, 2:54:46 PM Hello I purchased this roof rack and love it, but I was wondering what I needed to purchase to mount 2 mountain bikes on top, thank you
A 06/25/2021, 11:53:18 AM There are many options for this, from single fork mounts to full length bike rails. You can contact our tech support team directly for some more info, or your local bike shop may be able to help.
Q Justin • 06/20/2021, 1:58:18 AM Is this a series 10 extrusion
A 06/25/2021, 11:39:28 AM Yes
Q Gavin Corbin • 06/23/2021, 1:19:31 AM I assembled the roof rack perfectly and placed it on my roof today. while I am driving down the street the front fairing makes a horrible rattling sound from the wind passing under it. I have it as low as it can go almost touching the roof of the truck with the weather stripping on it but the wind still gets under it. how can I stop the noise?
A 06/25/2021, 12:04:58 PM Please contact our tech support team and we can walk you through trouble shooting.
Q Scott Shepherd • 06/27/2021, 9:07:13 PM How does a light bar mount to this? Where are the mounting holes? What dimensions?
A 07/08/2021, 1:33:12 PM We supply brackets, they mount on top of the front most crossbar. Width is adjustable up to the max we specify.
Q ron • 08/11/2021, 0:44:10 AM Does this just use the 2021 stock roof holes for the mounting bolts?? I saw a video showing you guys drilling into the roof? why not use stock holes?
A 08/12/2021, 4:22:04 PM In the Double Cab it uses the stock holes in the roof, in the Access Cab there are no stock holes so drilling is required.
Q Jeremiah M. McCabe • 08/25/2021, 4:11:39 PM Have you tested fitment with a camper on the access cab, such as a GFC, Vagabond, or Four Wheel for clearance under flex? I would like the fairing for an 05 Tacoma w/ a V2 GFC Camper.
A 09/02/2021, 4:03:54 PM We have not tested with a camper no.
Q Nathan Peterson • 09/08/2021, 3:19:03 AM How is the roof rack mounted to the top of the cab? Will I have to drill into the roof to install it?
A 09/09/2021, 10:29:08 AM Drilling is required on the Access Cab only. The Double Cab bolts directly to factory mounting locations.
Q Eric • 10/11/2021, 11:14:03 PM I Need to carry skis on roof rack. Do u sell accessories for that?
A 10/18/2021, 12:43:31 PM We do not. We recommend the Thule Snowpack 6, they will mount to the roof rack crossbars. Most of Thule's universal mounts should work with our Roof Racks.
Q Aaron Gingrich • 11/28/2021, 5:00:23 PM Can you mount a Thule Force XT l roof box on this rack?
A 12/01/2021, 9:55:17 AM It should work, but we have not tested this.
Q Ron • 11/30/2021, 4:37:42 PM 2016 TRD Double Cab - any suggestions on the from four factory holes? during installation of the roof rack, none of the bolts screwed in all the way. now just a giant gap between the head of the bolt and the mounts. there's nothing blocking the holes and the rear and middle bolts tightened all the way. Got any other bolts for those?
A 12/01/2021, 9:45:26 AM Tech support should be in contact with you to get this figured out!
Q Kristie • 12/08/2021, 4:10:32 PM I have a ‘14 Tacoma with a camper in the back. It’s only about 4-4.5” air gap between the camper and truck roof. Is this rack short enough to clear with a little wiggle room for rough trails
A 12/09/2021, 10:26:01 AM There will not be quite enough room for the rack with that amount of space.
Q Diondre • 01/07/2022, 12:09:43 PM I drive a 2008 access cab Tacoma is there additional drooling that needs to be done to install the roof rack
A 01/12/2022, 11:00:59 AM Yes, you need to drill for the access cab models, please see the installation video.
Q Jason • 01/16/2022, 6:24:49 PM I have a Yakima Skybox 18 and wanting to know if the C clamps will have enough clearance to slide under the crossbar to mount.
A 01/24/2022, 1:56:29 PM The worst the under rack crossbar clearance gets is in the center of the roof and it's about .750", It gets near 2" as you get to the outside edges of the rack. Let us know if we can help with any other measurements.
Q Ernie Villa • 02/20/2022, 6:46:55 PM Just installed my Tacoma double cab roof rack, and was wondering what the rubber plugs in the parts kit is used for?
A 03/04/2022, 2:40:36 PM We use the same hardware kit for multiple racks. They aren't used on this application.
Q Shaun • 03/01/2022, 9:51:54 AM What size carriage bolt will fit in the tracks on the cross bars?
A 03/04/2022, 2:04:39 PM They are not designed for carriage bolts.
Q Jesse • 03/24/2022, 11:39:47 PM Can this support a rooftop tent with two people staying in it?
A 04/06/2022, 1:16:03 PM We really recommend a bed rack for tents on Tacomas.
Q Austin Salmon • 04/10/2022, 2:00:53 PM What is the maximum depth of the LED bar that can be fitted? For example, the Led bar I'm looking at is 39 3/8" wide and 3.5" deep. Would A light bar that has a depth of 3.5 inches fit here? Its a single row light bar. This is the light bar. https://extremeledlightbars.com/extreme-stealth-single-row-led-light-bar-combo-spot-and-flood-?gclid=Cj0KCQjwgMqSBhDCARIsAIIVN1WJ-nwDhC9_u5FYv2DIxP-28hlzvTAfFyFxKoK-CWtUBEXG7gVRMgoaAltJEALw_wcB
A 04/26/2022, 10:16:43 AM That will work.
Q Zach • 04/14/2022, 5:27:13 AM Is drilling required at all for the access cab one?
A 04/22/2022, 2:28:32 PM Yes, it is required on the Access Cab.
Q matt ilnycky • 04/14/2022, 5:22:54 PM I'm looking to purchase this rack to haul 2 Kayaks, what kayak holders are recommended that work well with this rack? Double cab Tacoma. thanks
A 04/27/2022, 12:01:31 PM Yakima JayLow with the rubber mounting pads removed, or many universal J-mounts will work on the bars as well.
Q Zach • 05/14/2022, 8:45:20 AM What lightbar would you recommend for this rack?
A 05/16/2022, 9:35:26 AM We recommend the Baja Designs S8 40" LED Light Bar. Check for it on our site!.
Q Jake • 06/30/2022, 10:12:48 PM What are the sizes of the cutouts on the rear of the rack for bed lights?
A 07/08/2022, 10:49:50 AM Our VRKLEDs will fit in the largest cutout in the rear fairings.
Q Michael • 07/25/2022, 0:51:17 AM Will this roof rack work on a 2022 Toyota Tacoma Double Cab?
A 08/08/2022, 11:14:10 AM Yes, it will.
Q sterling • 07/26/2022, 12:31:45 PM What kind of drilling is required for the access cab install??
A 08/08/2022, 11:25:24 AM The Access Cab does not have factory mounting locations. It requires drilling through the roof to mount the rack. Checkout the Access Cab install video on the product page for more info.
Q David • 12/31/2022, 2:54:54 AM What's the weight of the assembled roof rack? Topper rack?
A 01/03/2023, 11:26:51 AM The roof rack weighs about 41lbs, the topper rack is about 25lbs.
Q Nathan • 04/26/2023, 9:45:33 AM Are the rivnuts that come with the rack option for access cabs stainless steel or some other type of steel?
A 05/01/2023, 12:45:33 PM They are zinc coated steel. The waterproofing we recommend in the install video should shield them from the elements as well.
Q Mike • 08/08/2023, 3:34:44 AM Will the Access Cab rack accommodate a set of Max Trax MK2 ?
A 08/09/2023, 12:16:33 PM They can, you'd need accessory mounts in order to attach them to the rack though.
Q Mike Finley • 12/04/2023, 4:41:03 PM I have a 2022 Toyota Tacoma sport I was wanting to no if this rack can replace the factory rack and use the same bolt holes in cab.
A 12/05/2023, 4:46:35 PM Yes, the rack uses the factory rack mounting locations.
Q Josh Scholten • 12/11/2023, 2:33:20 PM Will a 43" AMBER/WHITE DUAL FUNCTION LED BAR fit, or will some modifications have to be made? https://caliraisedled.com/products/42-amber-white-dual-function-led-bar
A 12/14/2023, 10:23:35 AM The cutout fairing is designed for 41.25" max lens housing width single row LED light bar. Up to 43.5" (mounting stud width) bar will fit with our mounts, but trimming of the fairing will be required
Currently Viewing Reviews with a rating of 5. Click here to reset.
★★★★★ ★★★★★
4.91/5 Stars out of 32 Reviews
1
0
2
0
3
1
4
1
5
30
Pages 1   2   3
Great rack
(Portland, OR) | August 27th, 2023
I did a lot of research for a rack on my Tacoma before buying this one. I had a Hooke Road rack and for a cheap one it was ok however it wasn’t cut very well and rubbed on the roof in the front, just nota great rack and it was heavy. I got this one from Victory due to it being all aluminum, price and made in the good ole USA. It shipped out really quick and showed up exceptionally well packed. Instructions were very simple to follow and I had it installed on my roof in about and hour. My overall impression is this is a well thought out extremely good rack. I have already purchased the grab handles and lights as well as the awning brackets and I must say I am very pleased with everything. I will definitely continue to use Victory for my future needs and would recommend them to all my friends. There customer service is outstanding as well. I was even contacted after sales to find out how my purchase went and how my product was. Great company.
Note From Victory 4x4: Thanks, Randy!
Well built /designed roof racks
(Long Island, NY) | April 27th, 2022
I purchased 2 racks for my 22 Tacoma, one for the crew cab and the 2nd for the 6' lear cap I had installed shortly after my truck purchase. I found the racks to be sturdy / well built add ons and the install fairly easy with a second set of hands. The packages arrived undamaged with extra hardware included just in case. The only hiccup was I originally ordered the front fairing without the cutout but later decided to add a light bar which has since been corrected. Also, I did not take advantage of the first responder discount when placing my order which is totally on me. Overall I very satisfied with my purchases and my dealings with customer service.
Sturdy Rack
(Oklahoma) | February 12th, 2022
This rack is built extremely well. Putting it together and installation was easy.The rack looks great and functions perfect, I would definitely recommend this rack. I love the fact that it uses all three mounting points on the roof instead of just two like most of the other racks that I looked at and considered purchasing. As for the wind noise, yes there is some added wind noise at highway speeds, You are attaching something to the roof of the vehicle there will be some extra wind noise there is no way around that. The extra wind noise with this rack is pretty minimal in my opinion and my wife feels the same. Anyone complaining about the noise doesn't understand aerodynamics. All in all I am extremely happy with the rack, it has given us so much more space to pack gear for our camping and kayaking trips. If you are looking for a solid roof rack for your Tacoma, do not hesitate to buy this one.
Solid build and easy install
(New England) | January 30th, 2022
I’ll keep this short and sweet. Super solid roof rack. Easy to install as I did it solo. Just asked my neighbor to help lift it once it was ready to bolt down. Zero wind noise that I can tell. My MPG have gone down some, but that’s expected. I see the price went up from when i purchased. Guessing supply chain issues is why. Well worth the $ spent. Also, love the military discount that supports our veterans.
Excellent rack, better than expected for the price
(MI) | January 12th, 2022
I did extensive research including talking with competitive product owners and watched more YouTube reviews than I can remember before buying a roof rack for my 2020 Tacoma. I didn't see any Victory brand racks on any vehicles around my area but their product seemed like a viable option. I wanted to get a solid rack for both highway and off road. I also wanted a matching cap rack to be able to haul materials and toys longer than the bed on the Toyota. Victory had both quality racks and a matching set so I ordered them both to see if my research was worth all the effort. The roof rack went on easily and quickly with help from a second person to be sure I didn't scratch any paint. The directions were simple and combined with the many helpful hints on YouTube about installing GEN3 Tacoma racks, I had a great looking solid rack installed in under 2 hours. I mounted directly to the OEM rack mounts on the Tacoma roof for a low profile look. I added Loctite to all the screws to be sure they didn't come loose on the road. I chose the solid front fairing; no lights. I was worried about wind noise with the size of the fairing and when I did the test drive it was horrible. I readjusted the fairing down tight to the front roof line and it stopped the noise. I still have some occasional vibration noise from the fairing when I'm at highway speed or in very high winds but it's easily tolerable. It's far better than I had feared for a roof rack fairing. I've driven commercial pickups with multiple types of racks and ladders on the highway and compared to them, this rack is silent. I've driven about 20K miles on my Taco since installation and I'm impressed with the low noise, quality and it also looks great. I've hauled multiple loads on it and have had no issues. It's been rock solid and easy to attached anything I put on it. I'd recommend adding the Roof Rack Tie Down Rings for anchor points to keep loads in place. They work great and allow adjustment for load position that stays put. Overall a great purchase that I would recommend to anyone looking for a solid reasonably priced roof rack!
Awesome
(Auburn Wa) | July 13th, 2021
This rack is awesome. I chose victory over the other brands because getting answers from them and lead times were the best. I also think they have the coolest logo of anyone. The rack is strong and light weight and the finish on it is great. Everything was very well packed and nothing was damaged or scratched when it was shipped. I will be buying more of their products in the future.
Love the rack
(Texas) | April 18th, 2021
I was nervous about install in the beginning, but quickly executed everything once I got going. Just completed install an hour ago. Still working on the roof trim molding to fit in a strip instead of in pieces. That's my only complaint. I love how secure it is. I will write back once I take her on the road. But overall I love it. All my aftermarket parts will be victory.
Awesome rack!
(TX) | February 24th, 2021
First and foremost, yes, I also had wind noise. When I got the rack (with the lightbar cutout) I did not have a light bar yet, and the wind noise was so noticeable that I felt like I was the loudest thing on the road, though I doubt other drivers could hear it. However, once I mounted the light bar, the wind noise almost completely subsided and I've gotten used to whatever little noise there is and now I don't hear any difference. I haven't mounted too much to this rack except an awning, but it's very sturdy and I like it. I've gotten a lot of questions and positive remarks about it. Installation was slow for me, because I was trying to salvage the rubber strip in the channels on the roof. That took some cutting and trimming, and I used some sealant on the bolt holes on the roof to ensure there was no leaking. Overall, looks really good and I love the rack!
Wind Noise
(Austin, TX) | January 22nd, 2021
The amount of wind noise I got from this rack was insane. Going over 50+ mph it sounds like I'm in a tornado! Overall the build was decent but wish there was some way to get rid of the wind noise. I tried everything and even contacted Victory.
Note From Victory 4x4: Mike, wind noise is not a common thing we hear about this rack. Please contact our customer service team again so we can help you troubleshoot.
Roof Rack and sliders
(Arizona) | December 29th, 2020
Purchased both the roof rack and the sliders. Install went well referred to the online video more than anything. Wish now that I purchased the roof rack with the light cut out but we’ll see what I end up doing for lights. Hope they change all the bolts to a black metal don’t really like the shiny stainless look prefer black on black. Overall great products!

ACCESSORY MOUNTS

A wide variety of accessory / lighting mounts available and the list is growing!

See related products below!



SUNROOF COMPATIBLE

Allows for full functionality of all standard sunroofs



BUILT FOR ADVENTURE

Designed with your outdoor gear in mind.



Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.






Related Products