GX Rear Bumper | Strike | 460 (10-23)

Description

When you need maximum protection, recovery options, and a modular swingout system; our Strike Series rear bumper is the perfect choice. This made in the USA bumper features integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swingouts that can be added or removed at any time! (Sold separately.) The bumper is available in a two-stage satin textured black powdercoat over durable zinc primer finish.

CNC cut and formed from .188" steel.
Built-in hitch.¹
Built-in provisions for cube lights.
Built-in provisions for left and right Adventure Carriers (can be added at any time, sold separately; see related products below.)
Built-in provisions for factory proximity sensors.
Bolt-on installation.
Proudly designed and made in the USA.

Ships freight only!

Rate calculated at checkout. Please contact us with any questions:

https://www.victory4x4.com/CTUS.html

¹ Built-in hitch tied-in to the factory hitch receiver mounting locations.

Designed to support the loads of the factory center-mount hitch tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.

We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. We cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.

Looking for answers to common questions about us or our products? See our FAQ here.

Product Q&A

12 Questions asked on GX Rear Bumper | Strike | 460 (10-23) • Ask a Question

Ask us anything

Q Jeremy • 09/03/2021, 1:05:04 AM Is this bumper compatible with the GX460 blind spot monitoring system?

A 09/07/2021, 1:34:16 PM It does include mounting locations for the factory proximity sensors.

Q John • 09/10/2021, 3:41:09 AM What Lights work best for the square cutouts?

A 09/15/2021, 3:05:00 PM We recommend Baja Designs Squadrons, any 3x3" cube light should work.

Q Sang • 01/04/2022, 3:21:37 AM What is the weight of this bumper?

A 01/04/2022, 5:34:47 PM Weight: 145 (lbs)

Q Kevin • 01/07/2022, 3:43:46 PM Is there a change to the amount of weight you can tow with this bumper vs the factory tow hitch?

A 01/12/2022, 11:00:59 AM Please read the product description for this information.

Q Michael • 01/08/2022, 10:40:04 AM What size is the hitch? 2" or 2.5"?

A 01/12/2022, 11:00:59 AM 2"

Q Steven • 02/07/2022, 4:45:05 PM Is any weather stripping (like what's included with your roof racks) included with the Strike bumper? If not do you sell it separately?

A 02/08/2022, 11:27:20 AM It is not. We don't sell it separately but search for rubber edge trim, there are lots of options available.

Q Luke • 02/23/2022, 4:10:27 PM It looks like the bumper accommodates the stock reverse lights on the 10-13 GX's but they are in a lower position on the 14+ GX's. It looks like they would be blocked or need to be cut out with this bumper and don't see where they would be mounted with this bumper, based on these pictures.

A 02/28/2022, 9:33:47 AM That's correct. On the 14+ the LED cube light provisions will be used instead and wired in as reverse lights.

Q Ryan • 11/19/2022, 11:40:44 AM Do you offer install?

A 12/01/2022, 10:38:33 AM We do not.

Q Tom • 02/13/2023, 2:09:33 PM While the spare tire fit in the stock location with the new bumper installed?

A 02/14/2023, 4:26:49 PM Yes.

Q Jack McRoberts • 05/23/2023, 8:05:07 PM Whats the largest size tire I can fit underneath the vehicle with this bumper?

A 05/24/2023, 11:57:08 AM Our bumper does not impede the factory spare location anymore than a factory bumper would. We have not tested tire sizes in that location to be specific, but anything you can fit with the stock bumper would work with ours as well.

Q Nathan • 04/05/2024, 9:12:13 PM How do the cube lights mount in the bumper? Top, bottom or side of cube.

A 04/15/2024, 5:13:45 PM The light mount would be oriented under the light when bolted into the bumper.

Q Alex • 05/01/2024, 8:08:31 PM Would one be able to install the factory tow hitch underneath the bumper to allow legal onroad towing?

A 05/20/2024, 5:12:46 PM The factory tow hitch can not be installed with our bumper.

Reviews

There are no reviews for this item yet.