I chose to purchase the Victory rack for my 2017 GX460 based on two factors: online reviews and the way the rack sits on the vehicle. In my opinion, this is the best-looking roof rack on the market. I installed the rack myself in about two hours. I have worked with extruded aluminum before, so there might be a bit of a learning curve if you have never threaded steel bolts into aluminum before. It is not difficult, but there is a certain feel and touch that can help you avoid stripping the threads. I have hauled a sheet of plywood, kayaks, bicycles, and a stand-up paddle-board on the rack. So far, so good! My one other piece of advice is to try to plan your use cases for the rack well before you need to load it up. Mounting things to any aluminum extrusion takes a bit of forethought and planning. I do not see this as a knock against Victory, because any style of rack that uses similar extrusions will have similar challenges. I have purchased several extra bolt sets and other mounting hardware, both from Victory and third-party suppliers, to round out my kit and have the flexibility to secure many different loads.

Fast shipping, easy to assemble, packaged wonderfully, very light, and of course looks super clean! Had to tinker with the front fairing a bit to get the wind noise down to a minimum. FYI for people with gx470 that I learned that wasn’t mentioned in the video. The weather stripping between the rear and middle rack to body mounts need to be cut a few inches, the middle mount will not lay flush on the bolt holes until you cut the strip. Secondly they recommend putting the weather stripping provided in the kit on the pointed corners of the back of the rack. On the gx470 those corners don’t touch the car but the middle of the rack does. So instead of cutting the remaining strip in half and putting them on those corners, I just centered the strip in the middle of the rack on the back side. Otherwise I followed all other directions and everything went smoothly

Its hard for me to be impressed this day in age and very few things exceed my expectations; however, this roof rack from Victory 4x4 has far exceeded my expectations. I have a 2017 White Lexus GX460. I recently had it lifted 3”, new black rims (Method), and new tires (Nitto Grappler). I needed something to tie it all together, and this rack accomplished my objectives. It looks great! I’ve had multiple compliments on the truck. The rack is extremely sturdy and well built. It took me about 2 hours, start to finish, to install it. The installation video was spot on. It fits the top of the 460 like a glove and looks great. I’m excited for my future off-roading adventures and carrying my canoe. This is an excellent product. Glad I went with this one over the others on the market.

I put this bad boy on about 6 months ago and have utilized non stop during camping season here in Colorado. I Love this thing and would highly recommend it! Easy to assemble, easy to instal, looks awesome and performs beautifully.

Just installed my Victory 4x4 roof rack on my 2015 GX460. Video instructions was spot on. Easy to follow. Perfect fit and finish. The quality of this product is far superior from other manufacturer. Cannot wait to install accessories for the rack. Could not be happier with the ease of installation. We’ll be buying other products from Victory. It’s a WINNER.

After doing tons of research I ended up at Victory 4x4. They are a hidden gem in this big industry, the attention to detail in this rack was amazing and have a feeling they are just getting started. The fitment and how to video was spot on. This was a huge upgrade for the GX, fit like a glove

Since I didn't have any help to lift the rack once assembled, I laid all the parts on the floor and assembled one by one on the roof of my GX460. I started with the main posts, then the rails, the rest of the parts just bolted right in. no adjustments or modifications needed. It has been 3 months since I installed the rack, no noticeable change in MPG and wind noise. My only regret is not ordering the fairing with the light cutout.

First, thank you for the fast shipping. received the rack in a week after I ordered. Installation was a little challenging for me since I did not have any help, so I resorted to assemble the rack directly on to the roof. took longer than normal, but all the parts bolted in perfectly with no slight issue. The youtube video helped out a lot also and was very detailed with the assembly. So far I have loaded some sheets of plywood on top for my diy drawer system.

Assembly: If you can use a screwdriver this should be very easy. The instructions video on YouTube was very thorough and easy to follow. This is a very easy rack to assemble. The only hard part is placing the rack on the vehicle. I used my wife and daughter (we are a tall family) to place it very gently on top of the GX. I did roll up some small towels, just as a precaution, and placed the racks feet upon the towels. That was the hardest part which was not that hard. Take your time and all should go well. Function: I have had two small Yakima racks on it at once with no problems. I put a piece of plywood on top and used some homemade T-nuts to secure it. My wife and I put chairs on top and watched a concert in the park. I am impressed with the strength and the things you can do with it due to the T-Nut function. I am also very happy that the powder coating is holding up well in the Florida sun. So far, the rack has held up great and we have used it on some light overland trips and on some long vacation trips to the Florida Keys. There is no extra wind noise noticeable by my ear and the decibel app on my iPhone. It does allow you to use your sunroof a bit more. It seems to get rid of the buffeting that I had without the rack. It is a great product that if nothing else takes the “Soccer Parents look” out of the Gx 460 Future plans are to order the Victory Awning Mounts and maybe the Accessory Mounts for some Rotopax containers.