GX Front Bumper | Blitz | 460 (14-23)

Victory 4x4 Blitz GX Front Winch Bumper

| 2014-2023

Our Blitz winch bumper for the Lexus GX is designed to integrate with your factory front bumper

fascia

for a clean look with maximum recovery options. This made-in-the-USA bumper features an integrated 20" lightbar mount, 3/4" recovery tabs, plus provisions for many industry-standard winches. A fairlead block-off plate is included for those that don't yet have, or need, a winch. The bumper is coated in a 2 stage satin textured black powder coat over durable zinc primer finish.

CNC cut and formed from .25" aluminum.

Compatible with most 8-10k non-integrated solenoid or removable selenoid winches.

Built-in provisions for a 20" single-row light bar (22" max mounting width)

Not compatible with Onx6 20" Light Bar.

Proudly designed and made in the USA.

Listed weights are with no tubing; single hoops and prerunner tube work add roughly 10 lbs in steel, 5lbs in aluminum; full grill and light protection tubing adds 30 lbs in steel, 15lbs in aluminum. (Not all tubing options are available on all bumpers.)

Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html

Looking for answers to common questions about us or our products? See our FAQ here.

26 Questions asked on GX Front Bumper | Blitz | 460 (14-23) • Ask a Question

Ask us anything

Q Jacob • 04/16/2021, 10:29:37 AM What is the weight of the 14+ Blitz bumper?

A 04/21/2021, 2:11:12 PM 70lbs

Q Chris • 04/28/2021, 7:23:03 PM How much clearance does this add over factory?

A 05/05/2021, 1:00:12 PM Around 5" at the fender edges and an inch our two in the center. We still have to protect the radiator and such, so we can't go a ton higher in the center.

Q Darrin Roush • 05/07/2021, 1:45:21 PM Does the GX 460 Blitz modification to the OEM bumper open up/expose the engine air intake because the wheel well liner is trimmed? In other words, would this modification necessitate a snorkel or similar in order to mitigate increased exposure/vulnerability of the engine to water ingestion (due to Blitz mod)? Thank you.

A 05/12/2021, 2:02:55 PM It doesn't open the air intake to dust any more than it is in the stock form.

Q Chris • 05/07/2021, 11:29:04 PM What is the approach angle with this bumper assuming no lift, stock tire size and wheels?

A 05/12/2021, 2:02:55 PM We have not measured this. It is much increased over stock.

Q James • 05/10/2021, 11:37:20 AM Can this fit the newer 2020 & 2021 Lexus GX460 that have the newer, larger grill?

A 05/12/2021, 2:29:21 PM The new grille is pictured in these photos. It fits both versions.

Q Sej • 06/03/2021, 2:16:11 PM Does this bumper work with the factory skid plate, or will I need to leave it off or order an aftermarket skid plate?

A 06/11/2021, 4:51:57 PM It should work fine with the factory skid.

Q Andres • 06/25/2021, 2:02:21 PM How do you operate the winch clutch lever with thisbumper?

A 07/08/2021, 1:15:34 PM Reach your hand through the vent holes on the face of the bumper.

Q Andres • 06/25/2021, 2:03:28 PM Does this bumper fit a warn zeon platinum 12k winch?

A 07/08/2021, 1:33:12 PM With the solenoid box still integrated on that winch, you may need to trim the grill support slightly.

Q Barry • 07/26/2021, 11:28:15 AM Is this bumper compatible with a WARN 103255 VR EVO 12-S? Thanks

A 08/12/2021, 3:19:21 PM Yes, those are the same size body as the 8s and 10s. It's a bit more winch than you need for a smaller SUV however as the 12s is really designed for 3/4 ton and 1 ton trucks.

Q Ishinder • 08/05/2021, 6:25:57 PM What winch and light bar are used in the pictures above?

A 08/12/2021, 4:22:04 PM This light bar: https://www.victory4x4.com/product/7020XX.html and a Warn VR EVO 10s

Q TC • 08/09/2021, 2:28:30 PM The description mentions tubing...can the Blitz be built with a single hoop tubing, and if so do you have any photos of an example?

A 08/12/2021, 4:22:04 PM That is just a cookie cutter disclaimer for weights. This bumper is not available with any tubework.

Q Chris • 09/07/2021, 3:27:48 AM Are the recovery tabs aluminum? How are they engineered to handle the stresses that actually trying to recover a vehicle might place on them?

A 09/07/2021, 1:59:29 PM Yes, they are aluminum. They are tied straight back to the frame mounting locations and also to the frame behind the frame horns with additional tie-in brackets. You can check out the install video for more info!

Q Alex • 09/08/2021, 3:48:58 PM What does the bumper weigh? Can the factory parking sensors be used?

A 09/09/2021, 10:30:25 AM It weighs 70lbs and includes mounting locations for the factory proximity sensors.

Q Chris • 09/13/2021, 3:21:46 PM How much testing have you done with wenches? I'm concerned about the 1/4" aluminum in terms of the wench plate. What have you done to stiffen that part so I can count on not deforming the bumper while wenching?

A 09/15/2021, 3:25:51 PM We have winched and recovered with this bumper without issues. The winch plate is reinforced and there are additional frame tie-in brackets to the bumper mounts.

Q Koray • 09/29/2021, 1:57:48 AM With the 70 lb weight, would it work with the stock suspension or does it require any suspension upgrade?

A 10/05/2021, 5:33:34 PM It will be fine with stock suspension, but if you start adding a winch and other accessories you may need to start thinking about aftermarket options.

Q Rick • 10/16/2021, 4:57:05 AM My grill is in production as I type this and being shipped to palm desert. How long to install

A 10/18/2021, 12:32:02 PM About 3 hours for the bumper install, additional 1 hour for winch wiring, additional 2 hours for light bar wiring.

Q Ishinder • 10/21/2021, 8:35:50 PM Where does the License plate go?

A 10/28/2021, 11:56:03 AM https://www.victory4x4.com/product/UNI-FPF-PC.html

Q Zach Lane • 11/08/2021, 2:49:36 PM Is the airbag functionality impacted?

A 12/01/2021, 11:26:40 AM The airbags are triggered by inertia sensors, the airbag system is not moved or modified during install.

Q Bryan • 03/08/2022, 9:01:16 AM I have seen a guy that put that this on a 2010-2013, but wouldn't respond to fitment questions. https://www.instagram.com/p/CZK39gEPaej/?utm_medium=copy_link Any ideas?

A 03/08/2022, 9:45:08 AM That was a different bumper from the 14+. We no longer offer the blitz bumper for the 10-13 models.

Q Kevin Pratt • 07/07/2022, 2:40:48 PM I live in Colorado where we have front lic plates, is there an accommodation for front plates to be mounted?

A 07/07/2022, 3:20:00 PM Yes! Checkout our Fairlead License Plate Flip. It allows you to mount your plate in front of the fairlead and flip it out of the way while winching.

Q RileyW • 07/08/2022, 5:28:45 PM Is the top filler piece included with the bumper, or is this a separate item that needs to be ordered?

A 07/11/2022, 9:48:19 AM It is included.

Q Ben D. • 11/26/2022, 11:34:47 PM I see that the vehicle shown is on 285/70R17's. Is that the largest tire size that will clear this bumper. I already own this product and I'm trying to plan ahead on some 285/75R17's.

A 12/01/2022, 11:10:43 AM 285/75 should be fine.

Q Ben Smrecansky • 04/19/2023, 6:54:52 PM Any issues with the front parking sensors in the center?

A 05/01/2023, 1:11:05 PM No, they work fine in our testing.

Q Luke • 06/10/2023, 1:00:34 AM When installing a Warn Evo 10S winch does the control box on top need to be relocated or can it stay mounted to the top of the winch?

A 06/22/2023, 11:18:48 AM You will likely need to relocate the solenoid.

Q Travis • 02/11/2024, 1:06:16 PM What winch do you recommend, assuming best value for money?

A 02/14/2024, 11:36:30 AM The winch plate is relatively universal, but we've had great luck with the Warn Evo 10-S.

Q Daniel • 03/23/2024, 3:15:53 PM Do you offer this style bumper for the GX 460 but with more radiator protection?

A 06/07/2024, 12:08:49 PM We do not offer any additional radiator coverage options for this bumper.

Top quality and design, updated instructions needed

★ ★ ★ ★

Mike Ainsworth (SLC, UT) | February 20th, 2022

First, the good. IMO this is the best looking armor for the GX. There’s another similar one, but the winch placement, light bar (must have imo) and victory logo look mean and awesome. Add a couple D rings w/ plastic trim to match whatever color your shocks are (red for me) and bam!! Excellent quality and safely shipped. No dings or workmanship issues. Couple notes: like the other reviewer, install instructions seem way off from current product. My gx is ‘18. Vid shows cutting straight down which doesn’t match the angle of the product. Lots of measuring regrinding, refitting. I worked with a pro which in my opinion was critical for my exp. Overall, happy with how it turned out

GX Front Bumper | Blitz | 460 (14-23)

Ask us anything

Write a Product Review: GX Front Bumper | Blitz | 460 (14-23)

Related Products