Skids: Front, Mid, Tcase, and Gas Tank these skids hold up quite well to the absolutely nutty amount of abuse i throw at them by rock crawling on the regular in a 2012 4runner. I have had the engine skid since shortly after i bought the truck ( only gripe with the engine skid is the oil filter access panel doesn't have the nuts welded on the backside so it's kinda a pain. i tried threaded nutserts as a solution and then it got lost on a trail somewhere. they made it easy to order a replacement which was nice. Just recently added the rest of the skids and can say that they also handle the abuse that i throw at them now that i have long travel and lockers. They may need to reinforce the mounting brackets for the gas tank skid but i feel like that is a uniquely me issue as i used it as a bash plate on a level 8 trail and bent the front brackets making it scrape my driveshaft. but a little bit of help from a friend with a winch and it pulled right back and we carried on which is nutty to me. all in all. if i can abuse these steel skids as much as i do then they can handle just about whatever you can throw at them. Keep up the quality work yall and i will let you know when i can no longer remount this engine skid haha

Skids: engine/mid/trans - aluminum powder coat 2000 SR5 4x4 - Overland influenced build 3" lift w/285/70/17 Addco sway bars f/b diff drop SPC UCAs Other quality parts from Sonoran Steel These skids came packaged well, unpacking I was immediately impressed with the build quality (I have done quite a bit of metal fabricating over the years so appreciate good build quality). The aluminum skids are perfect for what I need and of course much lighter than steel. Aesthetics\quality\function\fit were very important to my decision to choose Victory, and these skids easily checked all the boxes. The install was very easy (Note: if you're new to these kinds of installs, watch the video a few times and don't drill any holes until you know how it all fits). The result is a high-quality interlocked design that looks like it belongs on the truck and not just tacked on as an afterthought. Even slightly Toyota oem inspired. I'm guessing the Victory steel skids would be of same quality and fit. I researched just about every skid I could find for a more overland inspired style that would still be tough enough if the truck ended up in a place that required advanced protection. My only regret is that I didn't just get these ordered a long time ago. If you're in the market for a high quality, advanced design skid that fits the way it should and looks like it belongs on the truck, you found it. Thanks Victory – Cheers!

Pretty straight forward installation. Worth it for the oil changes alone. Thick steel, nice powdercoat, can access lower arm cam bolts without taking it off. Stainless hardware has held up very well. I would definitely recommend this skid plate.

I purchased the front skid plate, the mid skid plate and the transfer skid plate because all three of these fit together perfectly. I know how heavy duty these are because I installed them myself in my driveway and got an incredible workout lifting all 120 lb to get these things on (they're roughly 40 lb apiece). Unless you have a lift and a transmission jack at your disposal, I highly recommend getting some help and not installing them alone like I did. They look amazing and they even make my GX bit more aerodynamic as I drive down the road because there's a smooth flat surface underneath.

Good company, great product and I have the roof rack, skids, blitz bumper etc from Victory. Only issue is that it's not truly KDSS compatible. Have had rubbing on my KDSS suspension to the point its rubbed a bit of steel off and is close to the bushings at this point. Might have to replace the KDSS bars or bushing sooner then later due to the wearing that was occurring. Had to take it off and cut the side wings with a plasma cutter to get it to clear appropriately. Was installed to spec by professionals not a botched install. IF you do have KDSS I would cut the wings off the sides so as not to damage the truck as happened to me.

I called a few weeks after I place my order and they stated they lost it but would get it right out to me. I then called two weeks later and spoke to the President who advised they said production had not begun and the production times are listed on the website. By the way they based on the times advertised I should have received my product twice. I called back and canceled my order. I ordered an RCI and received it within 5 days perfect condition. I don’t recommend working with this company. The President never followed up with me as well.

Steel powder coated version - great welds, thick and tough. Product looks well made. There are no instructions for installation. Videos on website not helpful since I’m not installing a prototype or full system. Bad experience with install means I’m changing to another company for other products. Victory is cranking out products no doubt, but once it leaves the factory, you’re on your own.

This skid is beautiful! I bought mine in aluminum for some weight saving and when it arrived I was pleasantly surprised by how robust it felt for being so light compared to steel. I have no doubt this thing will take all the abuse I can put it through just fine, save maybe a direct sharp boulder slam. It also installed in 15 minutes!!! I had prepped the vehicle that morning by removing the OEM skids and braces as instructed in the newer install video. Once FEDEX dropped it off, I went into a 15 minute break (working from home) and had it all buttoned up at 15m40s. I used a jack to hold it against the chassis, slid those weird rear crossmember "washers" into place and it was done easily. Thanks for making yet another great product guys!! Mid armor amd rack are next on my list! Take care.

I got a coated steel front and mid skid for my ‘19 runner.. the build quality is top notch and I’m very satisfied with the whole experience. Total piece of mind with the level of protection they provide. Also access to the oil drain and filter was a piece of cake!

Met there guys at Overland Expo East in 2019 and really like what they are building. Needed to replace my son's OEM front skid on 2005 4Runner. Looked at a few and was very pleased with the quality of Victory. The price was fantastic , the craftsmanship is outstanding and the customer service even better. Would highly recommend Victory for all you 4Runner mods! Now it is time to work on my 2014 4Runner Trail Edition with front and rear bumpers form Victory!