4Runner Rear Bumper | Strike | 4th Gen (03-09)

No reviews yet. Write review.

  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)
  • 4Runner Rear Bumper | Strike | 4th Gen (03-09)

Price:
$1,999.00
Now:
$1,799.10

 

Code: V4R4RS2

Weight: 123 (lbs)




    When you need maximum protection, recovery options, and a modular swingout system, our Strike Series rear bumper is the perfect choice. This made-in-the-USA bumper features integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swingouts that can be added or removed at any time! (Sold separately.) The bumper is coated in a two-stage satin textured black powdercoat over durable zinc primer finish.

      • CNC cut and formed from .188" steel.
      • Built-in hitch receiver.¹
      • Built-in provisions for cube lights.
      • Built-in provisions for left and right Adventure Carriers (can be added at any time, sold separately; see related products below.)
      • Built-in Hi-Lift jack points.
      • Bolt-on installation.
      • Proudly designed and made in the USA.
    Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html

    ¹ Built-in hitch receiver tied-in to the factory V6 hitch receiver mounting locationsDesigned to support the loads of the factory tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
      We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing soWe cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.

    Looking for answers to common questions about us or our products? See our FAQ here.

    5 Questions asked on 4Runner Rear Bumper | Strike | 4th Gen (03-09)

    Ask us anything



    Q Casey Allen • 10/30/2023, 1:52:29 PM I have a 1” body lift on my 04 Runner? Do you offer it non painted for less?
    A 11/10/2023, 12:11:04 PM We only offer this bumper in a powder coat finish.
    Q Cory • 12/06/2023, 9:49:26 PM Is there a place to mount a trailer wiring connector?
    A 12/07/2023, 10:40:47 AM Not currently, but we are working on an accessory bracket for the 4th gen's that may be available in the future.
    Q Patrick • 01/22/2024, 7:14:12 PM Can the bumper be made so that it can use oem factory weight distribution hitch on the 4.7 V8 4Runner models?
    A 01/23/2024, 2:20:06 PM It cannot, our bumper only ties into the V6 hitch mounting locations.
    Q Darryl walker • 02/02/2024, 6:51:30 PM 1) will your rear bumper fit on a 2003 forerunner that is the 4.7 L V8 model ? 2) Will your bumper allow the 2003 rear bumper reflectors to be retained?
    A 02/16/2024, 11:38:12 AM 1) Yes, our bumper is compatible with V8 2003 4Runners. 2) Not an issue if doing just the bumper, it would not affect the reflectors at all. However, if you plan on adding swing outs to the bumper you would remove the reflectors.
    Q Marc Capuno • 07/05/2024, 4:08:48 PM Is there an option to keep the spare tire in placed as it is when installing this rear bumper strike?
    A 07/11/2024, 4:20:10 PM The spare does not need to be removed to do your install, but it does allow you more space to work with during your install.

    There are no reviews for this item yet.

    Write a Product Review: 4Runner Rear Bumper | Strike | 4th Gen (03-09)

    All fields are required except "location".
    Your email is for verification purposes only and will NOT be published or shared. See our Privacy Policy. Thank you for your review!
    Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
    Please be sure to read the PDF installation instructions (if available) as well.




    Related Products