Land Cruiser Roof Rack | 100 Series - Lexus LX 470 (98-07)

Description

This roof rack system allows for mounting almost anything, freeing up valuable cargo space for other trip essentials. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.

CNC cut and formed from 3/16" aluminum (steel mounting brackets) with extruded aluminum rails
Easy bolt together installation
No drilling required
Available with or without 40" lightbar cutout

Lightbar cutout version includes light bar mounting brackets
Cutout fairing designed for 41.25" max lens housing width single row LED light bar. Up to 43.5" (mounting stud width) bar will fit with our mounts, but trimming of the fairing will be required

Milled T-nut access points
Sunroof tilt and sliding function works with racks
Fairing Edge Trim Included
Powdercoated
Hardware Included

Black stainless hardware available, see related products

Made in the USA
Free shipping!

We recommend using paint protection film under the front and rear fairings, where they contact the vehicle. This will prevent dirt and debris from scratching the paint over time.

3M Paint Protection Film

Looking for answers to common questions about us or our products? See our FAQ here.

Product Q&A

15 Questions asked on Land Cruiser Roof Rack | 100 Series - Lexus LX 470 (98-07) • Ask a Question

Ask us anything

Q Kris B. • 04/14/2020, 2:58:40 PM Will you guys be making one for the 80 series?

A 04/17/2020, 6:46:58 PM We don't have plans at this time for the 80 series.

Q jimmy santos • 04/15/2020, 8:28:06 PM Hello, Will this fit a 2012 Toyota Sequoia?

A 04/17/2020, 6:53:08 PM Not to our knowledge.

Q Jim Joe • 04/20/2020, 3:24:12 PM What size is this rack?

A 04/20/2020, 3:24:22 PM The usable area is roughly 77 x 51"

Q Waheed • 08/03/2020, 1:46:55 PM What is the total weight and size of the package that it comes in? Thank you

A 08/05/2020, 12:21:56 PM Two boxes. 88" x 5 x 3 4 lbs and 56" x 9 x 6 15 lbs

Q Najeebullah Safi • 08/04/2020, 6:41:30 PM Do you deliver Land Cruiser Roof Rack| 100 series Land cruiser (98-07) to UK??

A 08/05/2020, 11:51:45 AM We currently do not ship to the UK.

Q Nicholas Burgher • 01/16/2021, 10:08:51 PM I hope I'm not missing this in the description but how many cross bars come with the rack?

A 01/20/2021, 10:01:18 AM 7 crossbars

Q thomas reilly • 02/03/2021, 5:41:13 PM How much weight can this rack hold ? will it hold a roof top tent ?

A 02/08/2021, 11:48:56 AM Toyota rates the roof with a factory rack at "Max load 150 lbs evenly distributed." Our rack itself can handle significantly more weight than that, and we've had 250 lbs dynamic weight on it without issue, static capacity is certainly well above that. All these weight will be at your discretion as they are above Toyota "recommended" capacities. If you need more information please contact us directly at [email protected]

Q Andrew Gilbert • 02/07/2021, 10:17:22 PM What is the amount of weight the rack can hold

Q Dave D • 03/05/2021, 1:31:32 AM Your weight under item code number is 49lbs, but your Q&A 8-5-20 answer says it ships in 2 boxes: a 4 lb and 15 lb. Shouldn't the 4 # be 34#? You also state 7 rails, but in a couple of your pictures I count 8 between front and rear fairings. Which is right? What cost discount will you give me if I order with no SS or SS anodized fasteners?

A 03/05/2021, 3:59:09 PM Yes, should be 49lbs total. The 100 Series rack has 7 crossbars, looks like the page had an incorrect photo. All racks will come with stainless hardware, black hardware can be added here if you'd prefer! https://www.victory4x4.com/product/046-0061.html

Q Steve • 06/29/2021, 12:08:23 PM Do you know if Thule or Yakima roof cargo boxes can be mounted directly onto the cross bars?

A 07/08/2021, 1:33:12 PM We have not tested these at the shop. Those boxes and mounts are typically pretty universal.

Q Todd Henley • 08/28/2021, 11:03:59 PM Hello, how much taller is this than the standard Toyota factory roof rack, i want to make sure it will still fit in my garage before i buy and install, thanks!

A 09/02/2021, 4:11:46 PM The top of the rack is 2" above the top of the roof. We don't have a factory rack to measure, but we assume ours is lower.

Q Scott R • 11/21/2021, 1:10:47 PM How is the wind noise and the mileage drop?

A 12/01/2021, 11:28:01 AM Additional wind noise and decreased mileage aren't really noticeable.

Q Hunter • 12/27/2021, 10:14:40 PM Is there a way to install the light bar without drilling extra holes in the roof? Or did you all drill another hole when installing it?

A 12/28/2021, 10:36:12 AM There is no drilling required for the roof rack. You can run the lightbar wiring down the side of the windshield trim down under the hood.

Q Aaron • 01/30/2023, 10:56:14 PM I’m looking to add an aluminum clam shell rooftop camper and the dimensions are 130cm by 210cm. Will it fit down into the recessed area in the roof rack? Thank you!

A 02/03/2023, 1:53:04 PM The area in side the sides of the rack is roughly 196mm x 129.5mm. It would be close. You could always slightly elevate the tent with spacers or our tent brackets: https://www.victory4x4.com/product/VRKRTT.html

Q Eric H • 04/11/2023, 8:42:27 PM What is the tubular dimension of the cross bars?

A 04/17/2023, 7:24:12 PM 1" x 2"

Reviews

Currently Viewing Reviews with a rating of 4. Click here to reset.

★★★★★ ★★★★★

4.8/5 Stars out of 5 Reviews

Write a Review.

1 ★

2 ★

3 ★

4 ★

5 ★

100 Series Roof Rack Install on 2000 LX470

★ ★ ★ ★

Jordan T (Georgia) | March 30th, 2021

Customer Service - 5/5! Form - 5/5! Function - 5/5! Fit - 3.5/5 I ordered the 100 Series Roof Rack w/o the light bar cutout as part of the Victory 4x4 Black Friday Sale to install on my 2000 LX470. Both packages the roof rack comes in arrived together and earlier than estimated. Everything was packaged well and the quality of the parts was great, except for one bracket that was off by about 15 degrees. The Victory 4x4 Customer Service Team replaced the bracket very quickly and shipped a new one same day for me. The rack was relatively easy to install and the instructions were pretty straight forward. The orientation of the Left and Right brackets for each mounting position Front, Middle, and Back was a little more challenging than expected, but I was able to figure it out with a tape measure. Everything installed well, lined up right, and looks great! My one complaint is that there is minimal up and down adjustability. I have the rack "all the way up" and there is still only about 1/8" - 1/4" between the rack and the luggage bars on my roof. This really isn't a big deal, except that in heavy wind the deflection in the rack sometimes allows it to hit the roof luggage rails and make some noise. I would highly recommend the product and Victory 4x4 for their craftsmanship and especially customer service! Hope to pick up some of their other items in the future.