Dual Jerry Can Carrier | Adventure Carrier
★★★★★
5/5 Stars. (5 Reviews)
Price:
$289.00
Now:
$260.10
Code: UNI-DJC-PC
Weight: 20 (lbs)
Free Shipping!
- Dual Jerry Can Carrier for the Victory 4x4 Adventure Carrier or Roof Rack.
- Coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
- CNC cut and formed from 14 ga (.078") steel.
- Will work on left and right carriers or roof racks (use bolt kit: 046-0059 to mount on Victory 4x4 roof rack)
- Designed to fit Wavian 20L steel NATO cans (13½ x 6½ x 18½) and 22L plastic water cans (13 ¾” x 6 7/8" x 18 ¼”). Will also fit NATO cans of similar dimensions.
- Bolt-on installation.
- Hardware included.
Looking for answers to common questions about us or our products? See our FAQ here.
18 Questions asked on Dual Jerry Can Carrier | Adventure Carrier
•
Ask us anything
Q
Alex • 04/18/2020, 9:30:34 PM
Can this holder be mounted in the victory ladder for the 4runner? (5th gen, and with the additional hatch to support the extra weight).
A
04/20/2020, 2:57:14 PM
That would be too much dynamic weight of the hatch and ladder with those cans full, so no.
Q
Dave Paddock • 04/26/2020, 8:56:03 AM
Interested in the Dual Jerry Can Carrier for my GX460. Would that work? How does it mount?
Could I alternately attach it to the rear bumper of my travel trailer?
A
04/27/2020, 3:26:23 PM
It's meant to be universal and can mount to many flat surfaces.
Q
ron kendall • 06/15/2020, 11:46:25 PM
What are the outside dimensions of the Dual Jerry Can Carrier | Adventure Carrier ??
A
06/16/2020, 10:12:23 AM
Roughly 15" wide, 15" long, 19" tall.
Q
Christopher • 08/06/2020, 10:14:45 AM
Is there a way to secure the cans with a lock?
A
08/11/2020, 5:22:43 PM
Yes, there is a tab for a small lock.
Q
adam m • 08/22/2020, 2:57:10 AM
Will this fit Scepter plastic (gas and water) cans?
A
08/26/2020, 10:01:29 AM
Yes
Q
Zack • 08/30/2020, 4:40:35 PM
Can this Jerry can carrier be mounted to the Tacoma bed side or front molle?
A
09/09/2020, 3:26:39 PM
There aren't specific holes on the MOLLE panel for this, so you may have to drill. Depending on if you have a bed cover you may have clearance issues there as well.
Q
Brian M • 09/09/2020, 5:58:53 PM
Can the jerry can mount be used with the hi lift jack mount on the same swing arm? 5th gen 4Runner with 33” tire on the other swing arm
A
09/14/2020, 3:57:08 PM
The brackets cannot be mounted together on the same carrier. With some creativity (and a couple drilled holes) you may be able to mount a hilift on the side of the dual jerry can holder, however.
Q
David Beckman • 09/11/2020, 2:29:15 AM
Is there enough room for this to be mounted on the adventure carrier with a high lift jack mount? Running a 34” tire on the other adventure carrier.
A
09/14/2020, 3:57:08 PM
The brackets cannot be mounted together on the same carrier. With some creativity (and a couple drilled holes) you may be able to mount a hilift on the side of the dual jerry can holder, however.
Q
Sean • 09/28/2020, 3:54:02 PM
Can this be mounted to the roof rack too? Vertically or horizontally?
A
10/01/2020, 1:40:01 PM
Yes
Q
Cash • 05/13/2021, 1:43:19 AM
Is it possible to move the jerry can mount up and fit the license plate below it?
A
05/21/2021, 9:59:41 AM
There are multiple mounting configurations, but to go that high on the carrier may require drilling new holes.
Q
grant • 05/16/2021, 11:55:01 PM
can this be mounted on the back of 2007 fj cruiser?
A
05/21/2021, 10:18:52 AM
We will have an FJ tire carrier soon that this can mount to.
Q
Cheyne Austin • 11/30/2021, 2:23:26 PM
Can this mount to a rigd ultraswing in place of the tire carrier? To answer this, are the inside mounting holes 3” apart left to right and top to bottom? Thanks!
A
12/09/2021, 4:17:22 PM
I don't think it will. The hole pattern is 4" top to bottom and left to right.
Q
Bob • 01/05/2022, 4:01:23 PM
Can this be mounted to the back of my Opus OP-4 pop up camper [near the spare tire]
A
01/12/2022, 11:00:59 AM
They are meant to be mounted wherever they fit and have a secure backing to bolt to.
Q
Jacob Roberson • 06/22/2022, 4:31:02 AM
Hi there, the description states that a size similar might fit. Would this work? I found some 20L Nato cans that are the size listed below.
18″ x 14″ x 6 1/2″
A
06/22/2022, 2:01:57 PM
14" wide is likely to be too tight.
Q
Michael • 12/08/2023, 9:24:28 PM
Do you have any tips for stopping the rattle of the dual Jerry can carrier against the swing out arm?
A
12/14/2023, 11:04:05 AM
The two will be bolted together, so there should be not rattling between the two once installed.
Q
Noah • 03/15/2024, 7:06:36 PM
I'm looking to run two Scepter water cans mounted to my roof rack, the cans state they are 13.50 x 6.50 x 18.75 inches would both fit in the carrier?
A
06/05/2024, 4:19:00 PM
Yes, Scepter cans would also fit in this mount.
Q
Xiaogang Ji • 03/29/2024, 2:43:00 PM
Does this fit on owlvans mini SHERPA on B2 bike carrier (The owlvans mini SHERPA size fits this jerry can carrier) ?
A
07/17/2024, 3:57:26 PM
This mount can be attached to really any flat surface that allows for it's size of roughly 15" wide, 15" long, 19" tall.. The back of the mount is designed to accommodate a 4" x 4" bolt pattern.
Q
Eric webster • 05/05/2024, 10:09:28 PM
Will this mount to 2023 Bronco?
A
05/20/2024, 4:57:25 PM
This can be mounted to any flat surface, we recommend mounting it to our roof rack or one of our rear bumper swing outs.
Currently Viewing Reviews with a rating of 5. Click here to reset.
0
0
0
0
5
Edward (Fort Worth, TX) | March 17th, 2022
Is a great carrier and hold my wavians great. When holding nothing or a full load does tend to rattle a little but really not noticeable.
Matthew Kluitenberg (Pullman, WA) | August 26th, 2021
Very high quality product! I would buy it again. I mounted it directly to my Tacoma truck bed rail system by drilling additional holes. (along with one bolt into the truck bed). I use it to carry one Jerry can and one Scepter water can. The Scepter can does fit, but it is slightly taller which made things difficult. The top plate doesn't sit flat. This setup requires changing to a longer 1.0" carriage bolt, and using a smaller lock. I also added foam to the bottom of the top plate so it contacts the Jerry can without bending.
Adam (Knoxville tn) | May 11th, 2021
No complaints. Holds my scepter water and wavian fuel tight as can be. I did have to add a longer carriage bolt for the top hold down which I would have liked to seen victory add. Only other issue I have with it. And if you guys could do this in future batches that’d be awesome is put two mounting holes at the very bottom. With both mounting holes being higher it allows the bottom of the holder to rattle/vibrate against the adventure carrier. This was amplified by a full fuel can and half full water can on forest trail. I initially had all 4 button heads installed now I have 6. I added two holes in the bottom back that lined up with the holes already in the adventure carrier and it is rock solid enough that you definitely could stand on it if needed. Other than those two small things (Extra bolt holes in the bottom and a longer carriage bolt as the hold down). Would 100% buy again even if I didn’t have the victory bumper and adventure carrier.
Scott St Denis (Santa Cruz California) | February 17th, 2021
Mounted this on the back of my camper. Holds two Wavian jerrycans nicely. If you put the cans in backwards and lock it, nobody could steal any of your fuel. Overall, nice rack
Stephen husarik (Wyoming) | September 29th, 2020
Add the Jerry can holders to my swing love having water and fuel at the ready hold well the hole system works great together I have been on the Mojave road. With this system holds great no rattles from the holder
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions (if available) as well.
Please be sure to read the PDF installation instructions (if available) as well.
Related Products
Ladder | Adventure Carrier
$249.00
