Tundra Bed Side MOLLE and Accessory Storage Panel | (07+)
★★★★★
4.25/5 Stars. (4 Reviews)
Price:
$199.00
Now:
$179.10
Code: VTU23RMP-PC
Weight: 14 (lbs)
Free Shipping!
- CNC cut and formed from .120" steel.
- Sold individually
- Works on either side of the vehicle.
- Mounts using bed rail system.
- Includes Hi-Lift jack mounting hardware.
- One size fits all! Crewmax, Double Cab (both bed sizes)
- Installation requires drilling two holes.
- Will require slight modification to work with Bakflip tonneau covers.
- Proudly designed and made in the USA.
- Requires drilling plastic bedliner on equipped models.
Bed Side Molle and Accessory
Storage Panel | 2nd & 3rd Gen (07+)
Designed to maximize the storage space by utilizing the bed side. Offers customizable mounting for tools and gear. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
Tonneau covers that lower bed rail more than 1.5" will not work. If you have questions about your options, contact us!
Looking for answers to common questions about us or our products? See our FAQ here.
22 Questions asked on Tundra Bed Side MOLLE and Accessory Storage Panel | (07+)
•
Ask us anything
Q
Eric McCall • 03/30/2020, 2:35:16 PM
I see that these panels are screwed or bolted into place in the rails, right? The sliding Toyota tie-downs have to slide into the end of the rail by the tailgate, so how would those work in conjunction with these? Or would you install those in between the panel when the panel was installed and just leave them in place? Thanks!
A
04/06/2020, 1:46:00 PM
The updated design has these panels mounting behind the rails to give full access to them for other uses. Please see the installation video for an example of the current mounting setup.
Q
Albert Gardner • 05/31/2020, 11:37:30 PM
Will this system work with the Bedslide system? I have a Leitner rack. XXL gear pods and a Bedslide in my 2014 platinum tundra 5’5” bed. Would love to add this if it would fit .
A
06/01/2020, 10:08:59 AM
We have not tested it with a bed slide system. If it did fit, the bed slides themselves would cover much of the mounting area of the panels, we feel.
Q
Andy Gloss • 06/03/2020, 8:03:04 AM
Will these work with the 6.5’ bed length double cab?
A
06/03/2020, 4:22:33 PM
They will fit, but will be stop short of the front of the bed.
Q
Brandon • 10/16/2020, 3:23:36 PM
Will the Molle rack work with the factory drop in bedliner?
A
10/16/2020, 3:25:50 PM
Yes, but you will have to drill through the bedliner and the bed for the install.
Q
Nate • 10/20/2020, 8:42:23 AM
I have an real long bed (8-foot) Tundra. Is it an option to get a second grid piece that goes to the floor? I want to have a 3 piece set but didn't want to buy 2 kits.
A
10/20/2020, 7:03:20 PM
That is not something we offer separately at this time.
Q
Ben Willis • 01/20/2021, 2:19:43 PM
Can this be installed without the bed rail system?
A
01/25/2021, 11:34:30 AM
Yes
Q
J • 02/25/2021, 11:54:20 PM
How may piece of this side rail are we getting ? Didn’t see if this was one or two . Thanks
A
02/26/2021, 10:56:20 AM
The panel is two pieces.
Q
Bar • 03/12/2021, 9:26:28 PM
Dumb question but... is this a single panel or pair?
A
03/16/2021, 3:46:53 PM
They are sold individually.
Q
Antonio • 03/15/2021, 1:17:55 PM
Would this work with a Decked system? I know I would lose the bottom half, but still looking to utilize the upper if I have the drawer system installed.
A
03/16/2021, 3:46:53 PM
We have not tested them with a Decked System.
Q
Luis • 04/22/2021, 12:40:10 PM
Just a install tip, if your running these with the sweet Victory 4x4 bed rack you’ll have to adjust them all the way down to clear the bed rack brackets.
A
04/28/2021, 5:52:40 PM
Thanks!
Q
Gabriel Proctor • 05/13/2021, 9:06:47 PM
Do these fit a 2006 Toyota Tundra?
A
05/21/2021, 9:59:41 AM
No, 2nd and 3rd gen only.
Q
Roger • 11/07/2021, 4:18:52 PM
Two questions:
1. Will these work with a bed rug?
2. Will these still provide full use of the side cargo rails? Asking because I have an RLD cap that also uses those to mount.
Thanks!
A
11/18/2021, 12:36:28 PM
Yes, and yes!
Q
chad liford • 04/12/2022, 11:41:11 PM
I have a bedrug installed - would I need to source some slightly longer bed rail T30 bolts and also the screws to drill through the bottom bed section? The Bedrug is pretty thick.
A
04/27/2022, 12:01:31 PM
If your bedrug goes up the sides you may need longer hardware.
Q
Matt • 06/20/2022, 4:39:00 PM
Do you know if this works with the factory Toyota tonneau cover?
A
06/22/2022, 2:01:57 PM
If it's the kit that lowers the bed mounting rails, then no.
Q
ZACHARY • 12/07/2022, 7:14:14 PM
Will this work for 2022 tundra models with the spray in liner?
A
12/13/2022, 3:06:31 PM
Yes, the orange truck in the photos is a 22.
Q
Crystal • 05/01/2023, 0:08:04 AM
My application is not for a Tundra, I am needing a panel that is 52" long and wondering if this fits the bill? What are the dimensions of this panel?
A
05/01/2023, 1:11:05 PM
This panel is roughly 57.5" x 18 once assembled. In any other application, you may need to trim for your wheel opening, or trim the front panel shorter.
Q
Tyler Williquett • 05/03/2023, 9:06:20 AM
Will these work with the retrax cover?
A
05/08/2023, 4:14:47 PM
As long as the retrax doesn't lower the mounting rails, it should work fine.
Q
Hector Jasso • 06/12/2023, 1:08:47 AM
Will the panels work on either side of the truck bed?driver or passenger?
A
06/22/2023, 11:17:26 AM
Yes, they can be installed on either side.
Q
Ben • 07/26/2023, 0:10:09 AM
Is there a recommended weight limit for how much gear can be mounted?
A
12/01/2023, 9:31:32 AM
We do not have an official weight rating, but have mounted things such as hi-lift jacks, shovels, axes, recovery gear, all without issue.
Q
Virgil Pool • 09/04/2023, 6:04:05 PM
What's the recommended hardware for attaching the lower brace to the bed? I've got a hand-me-down that's missing those bolts.
A
12/04/2023, 3:29:29 PM
The install guide below will note which fasteners are used in each location.
www.victory4x4.com/mm5/installdocs/INSTALL_VTU23RMP-UPDATED.pdf
Q
Eric • 03/05/2024, 7:17:48 PM
How much does each side panel weight?
A
06/05/2024, 3:23:29 PM
14 lbs.
Q
andres • 04/02/2024, 8:11:21 PM
Would it be possible to install the overhead cab (that seals off the bed) as well as this product or will it conflict with the hole usage or just disturb the cover? thank you
A
04/15/2024, 5:32:58 PM
The bed side molle panels can be installed with a tonneau cover or topper.
0
0
1
1
2
KYLE SUCHARSKI (WY) | June 23rd, 2022
Great product, heavy duty and durable material. Decent instructional videos of how to install. Much more organized then a tool box and much more room for other things in the truck bed. Highly recommend!
Reece De Leon (Campbell, CA) | November 11th, 2020
Purchased one for my 2011 Tundra Crewmax, loved it so much that I ordered one more for the other side of the bed. Installation is super easy, does require 2 holes to be drilled in the bed.
That said, I have now ways and means to attach small things that just clutters up the bed, small things that gets thrown all over while driving. The best part for me is the ability to attach something above the tire well. Before it was just a wasted space. Now I can strap a small burner container.
Overall, worth it!
Max (Colorado) | May 11th, 2022
These Victory 4x4 MOLLE panels are the best offering compared to the competitors. They are incredibly easy to install and offer a ton of extra storage for typically unusable space.. My only gripe is that they are a little flimsy and with my 15lb Powertank mounted horizontally they flex in the middle. Needs some type of support bracket in the middle. 4.5 stars! Highly Recommend
BM | June 2nd, 2023
The product itself is good, but they sent the wrong hardware and the instructions were incomplete for a gen 2.5 Tundra. The install video and downloadable instructions on the product page only apply to 2022+. They sent a link to an older install video after I contacted them, but why not provide that to begin with? When I contacted support about the 2 missing bolts, they made me send a photo to verify the missing hardware (seriously, can't make this up), then shipped me more of the wrong hardware (2 complete packs for the FRONT panel, not sides).
Note From Victory 4x4: Thanks for the review. We had an updated parts list sent to the bolt supplier on that pack, and we assumed the updated one got sent to you, but that must not have been the case. We apologize for the issue. Please open your tech support ticket back up by replying to any correspondence and we can help you get any continued issues solved. Sorry again for the hassle.
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.
Please be sure to read the PDF installation instructions as well.
